Phone: 484-356-5351   Shopping Cart   Track Your Order   Gift Certificates
Sort By:
3" Paint Brush from Anjon Manufacturing3" Paint Brush from Anjon ManufacturingThis 3" paint brush from Anjon Manufacturing is the same paint brush included in the Anjon Seam Kits to apply primer before using seam tape to join two pieces of EPDM liner.
Anjon 1.5" BioBalls - Bulk 1600 Pieces Bio BallsAnjon 1.5" BioBalls - Bulk 1600 Pieces Bio BallsBio balls are small, pegged plastic balls mainly used as the biological media in ponds. These little plastic bio balls have TONS of surface area for the growth of bacteria for filtration. There are approximately 80 BioBalls per gallon. They are really simple to use: place into a mesh bag and drop into the pond filter.
Anjon 3/8" Weighted TubingAnjon 3/8" Weighted TubingAnjon 3/8" weighted airline tubing can be used with any air pump that takes 3/8" tubing, though specifically designed for Lifeline Air Pumps™ by Anjon Manufacturing. Using this weighted tubing, air pumps can add needed oxygen to Koi ponds in hot summer months when oxygen levels decline, and in the winter they help break down fish waste and prevent pond surfaces from completely freezing, allowing toxic gasses to harmlessly escape.

WBV.375X10, WBV.375X20, WBV.375X25, WBV.375X30
Anjon Black Straw Waterfall Foam - Seals and Controls Water FlowAnjon Black Straw Waterfall Foam - Seals and Controls Water Flow

Anjon Black Waterfall Foam is ideal for use in pond and waterfall construction. The color blends naturally with rocks, boulders and landscaping. Pond builders use foam to control the flow of water so that water flows OVER the spillways and ledges in the water feature instead of around. They also use it to prevent water from escaping under or around rocks.

Anjon Black Waterfall Foam, Foam Gun and Cleaner - Seals and Controls Water FlowAnjon Black Waterfall Foam, Foam Gun and Cleaner - Seals and Controls Water Flow

Anjon Black Waterfall Foam is ideal for use in pond and waterfall construction. The color blends naturally with rocks, boulders and landscaping. Pond builders use foam to control the flow of water so that water flows OVER the spillways and ledges in the water feature instead of around. They also use it to prevent water from escaping under or around rocks.

Anjon Disc Air Diffuser / Airstones - 5" and 8" SizesAnjon Disc Air Diffuser / Airstones - 5" and 8" SizesAnjon disc-shaped airstones are specifically meant for 3/8" weighted airline tubing, These airstone pairs very well with the Anjon 3/8" weighted airline and LifeLine Air Pumps™. The 5" airstone pairs best with smaller systems, while 8" airstones pair best with LL-45 or larger pumps.
Anjon Filter Media Bags - 20" x 30" or 24" x 36"Anjon Filter Media Bags - 20" x 30" or 24" x 36"Sized to fit popular filtering waterfalls and skimmers, Anjon media bags keep you filter media under control. Simply place Bio Balls, beads, ribbons, mats, or any other filter media inside. Anjon media bags are made of 100 percent corrosion-resistant polyester mesh, making it easy to add filter media to any system. 
Anjon Stainless Steel Fountain NozzleAnjon Stainless Steel Fountain NozzleThe most appealing aspect of a water garden is the tranquil sights and sounds of moving water. The Anjon Manufacturing Stainless Steel Fountain Nozzle has a height range of 2-4 feet, and you can choose from a range of fountain nozzle patterns to create a unique effect in their pond. These nozzles are easy to use.
Fountain Nozzles for Anjon Little Frog™ PumpsFountain Nozzles for Anjon Little Frog™ PumpsThese additional fountain nozzles are for certain sizes of the Anjon Little Frog™ pumps. FT-04 is the fountain nozzle for Little Frog™ LF-500 & LF-750. FT-05 is the fountain nozzle for Little Frog™ LF-950.
Photo Cell for Anjon Ignite LightingPhoto Cell for Anjon Ignite LightingThe Anjon Photo Cell for Rock Lights is a solar sensor that saves energy by automatically turning your lights on as the sun goes down.
Replacement Anode for Anjon IonizerReplacement Anode for Anjon IonizerThis replacement anode is for the Anjon Ionizer. Over time, the anodes of an ionizing system will need to be replaced in order for the ionizing system to remain effective.
Replacement Bulbs for Anjon Ignite LightsReplacement Bulbs for Anjon Ignite  LightsThese replacement diodes are for Anjon Ignite LED Lights. There are replacement LEDs available for the 1 Watt, 3 Watt, and 4 Watt spot lights; for the 1 Watt puck light; and for the 3 Watt and 9 Watt color-changing lights.

1WLED 1WLEDP 3WLED 4WLED 3WRGB 9WRGB 9WRGB-R
Replacement Impellers and Intake Screens for Anjon Little Frog™ PumpsReplacement Impellers and Intake Screens for Anjon Little Frog™ PumpsBelow are several available replacement parts for the Anjon Little Frog™ series of pumps. Replacement impellers are available here so that you can get the longest life out of your pump.
Replacement Impellers, Intake Screens, and Output Assemblies for Anjon Flood™ PumpsReplacement Impellers, Intake Screens, and Output Assemblies for Anjon Flood™ PumpsBelow are several available replacement parts for the Anjon Flood series of pumps. Replacement impeller, outlet assemblies and intake screens are available here so that you can get the longest life out of your pump.
Replacement Impellers, Intake Screens, and Output Assemblies for Anjon Monsoon™ PumpsReplacement Impellers, Intake Screens, and Output Assemblies for Anjon Monsoon™ PumpsReplacement Impellers for the Anjon Monsoon Pumps
Replacement Parts for Anjon Completely Clear™ 1200Replacement Parts for Anjon Completely Clear™ 1200These replacement parts for the Anjon Completely Clear™ 1200 enable it to resume its work of complete biological, mechanical and chemical filtration. Whether replacing the filter media, UV bulb, or other system parts, these replacement parts are an effective way to rejuvenate the Anjon Completely Clear™ 1200 system.
Replacement Parts for Anjon SimplyClear™ and BioPro™ Pressurized FiltersReplacement Parts for Anjon SimplyClear™ and BioPro™ Pressurized FiltersThese replacement UV bulbs and filter sets are for the SimplyClear™ 1000 & 2000 and BioPro™ 3000 & 4000 Pressurized Filters. Regularly replacing these parts enable the SimplyClear™ and BioPro™ to continue maximum mechanical and biological filtration.
Replacement Parts for Anjon Super Nova ExtreamUV™ and Stainless Steel Super Nova UV™ UnitsReplacement Parts for Anjon Super Nova ExtreamUV™ and Stainless Steel Super Nova UV™ UnitsThese replacement bulbs, covers/sleeves, and transformers are for the Super Nova ExtreamUV™ and Stainless Steel Super Nova UV™ Clarifiers. With over 9000 hours of algae control, these bulbs give long-lasting effectiveness, and the best way to rejuvenate a UV unit is to replace the bulb. The cover/sleeves protect the bulb, and the transformers are necessary for getting power to the UV unit.
Transformers, Extension Cords, and Power Splitters for Anjon Ignite LightingTransformers, Extension Cords, and Power Splitters for Anjon Ignite LightingThese Anjon transformers have durable epoxy-sealed housing and can be used with single light fixtures or multiple fixtures. Grounded power cord is included, and can be used with all landscape lighting systems with screw-on quick connectors. Power splitters can be used to splice several lights together into a single transformer, as long as the total wattage of all lights is less than the wattage of the transformer. Extension cords can also provide the necessary length to reach from the transformer, which must remain safely away from the water, and the lighting itself, which can be submerged.
Variable Speed Asynchronous Pump Controller for Monsoon™ and Flood™ PumpsVariable Speed Asynchronous Pump Controller for Monsoon™ and Flood™ PumpsThe Anjon Variable Speed Controller works with asynchronous pump up to 520 Watts to control their speed electronically. Think of it as a dimmer switch for your pump. The VAC15A controller is designed to control the water usage of Anjon Monsoon™ and Flood™ pumps, saving valuable energy by decreasing the flow while you're away from the pond!