Phone: 484-356-5351   Shopping Cart   Track Your Order   Gift Certificates
Sort By:
Anjon Seam Kits - With Primer, Sealant, Tape and Tools!Anjon Seam Kits - With Primer, Sealant, Tape and Tools!Anjon Seam Kits come with everything you need for effective application of seams and splices, including seam/splice tape, primer, lap sealant, and a seam roller and paintbrush.
Firestone 45mil EPDM Pond Liners - Cut Liner from 5x5 to 50x100!Firestone 45mil EPDM Pond Liners - Cut Liner from 5x5 to 50x100!Firestone pond liners are the industry standard for 45 mil EPDM. You can rest assured that your aquatic life will be safe, because these pond liners contain none of the algaecides & fire retardants found in roofing EPDM. In fact, durable Firestone EPDM Pond Liners are specially formulated for water gardens and backed by a Limited Lifetime Warranty.
Firestone EPDM Bonding Adhesive BA-2004 (T)Firestone EPDM Bonding Adhesive BA-2004 (T)

Firestone EPDM Bonding Adhesive BA-2004 (T) is a solvent-based contact adhesive designed specifically for bonding Firestone PondGard™ EPDM Pond Liner and Firestone 45mil EPDM Pond Liner to wood, metal, masonry and other acceptable substrates.

Firestone EPDM Repair KitFirestone EPDM Repair Kit

If your pond liner has a minor tear, fix it quickly and easily using the Firestone EPDM Liner Repair Kit. This kit contains all you need to quickly and easily repair minor damages to your liner.

    Firestone Lap Sealant HS - 11oz TubeFirestone Lap Sealant HS - 11oz TubeFirestone Lap Sealant HS is a low volatile organic compound (LVOC) sealant designed to be used with Firestone Splice Adhesive SA-1065 for seam edge treatment applications and as a sealant in other applications as indicated by current Firestone specifications and details.
    Firestone QuickPrime™ Plus - Quart and Gallon SizesFirestone QuickPrime™ Plus - Quart and Gallon SizesFirestone QuickPrime™ Plus is designed to clean and prime Firestone membranes prior to application of QuickSeam™ products, where required by Firestone Specialty Products specifications and details.
    Firestone QuickRoller™ ApplicatorFirestone QuickRoller™ ApplicatorThe Firestone QuickRoller™ consists of a 42.0” steel handle attached to a rubber-sleeved steel roller. The QuickRoller™ is designed to assist in binding Firestone QuickSeam™ products with Firestone membranes and other liners.
    Firestone QuickScrubber™ KitFirestone QuickScrubber™ KitThe Firestone QuickScrubber™ Kit consists of a scrub pad and holder that allows application of QuickPrime™. When proper pressure is applied, the handle flattens out assuring that proper pressure is maintained.
    Firestone QuickScrubber™ Plus PrimerFirestone QuickScrubber™ Plus PrimerThe Firestone QuickScrubber™ Plus primer application system consists of a scrub pad and holder that allows application of QuickPrime™ Plus from a standing position using an extension handle (not included).
    Firestone QuickSeam™ Cover Strip (Single-Sided Seam Tape)Firestone QuickSeam™  Cover Strip (Single-Sided Seam Tape)The Firestone QuickSeam™ Batten Cover Strip is a 6" wide semi-cured EPDM strip laminated to a QuickSeam™ tape. Unlike the 3" tape (which is double-sided to go between two overlapping layers of liner), this self-adhesive cover tape overlaps the seam.
    Firestone QuickSeam™ Corner FlashingFirestone QuickSeam™ Corner Flashing

    Firestone QuickSeam™ Corner Flashing is a self-adhesive, 8.5" diameter piece of uncured EPDM FormFlash laminated to QuickSeam™ tape. It is designed to flash outside corners or to be used as a cover patch where appropriate. It must be applied to clean, dry liner and should be pressed or rolled onto the liner.

    Firestone QuickSeam™ FormFlash™Firestone QuickSeam™ FormFlash™Firestone QuickSeam™ FormFlash™ is an uncured EPDM strip that is factory-laminated to QuickSeam™ Tape. This strip is designed to flash inside and outside corners, pipes, penetrations and other applications as specified in the Firestone specifications and details.
    Firestone QuickSeam™ Joint CoverFirestone QuickSeam™ Joint CoverFirestone QuickSeam™ Joint Cover is specially made to conform to irregular surfaces such as those at “T” joints, readily providing an excellent seal. Each Joint Cover is made of uncured FormFlash™ laminated to QuickSeam™ tape.
    Firestone QuickSeam™ Pipe Flashing BootFirestone QuickSeam™ Pipe Flashing BootFirestone QuickSeam™ Pipe Flashing is specifically designed to be used for flashing of rigid round penetrations of 1"-6". It is a prefabricated pipe boot with a QuickSeam™ tape laminated to the bottom of the flange of the boot.
    Firestone QuickSeam™ Splice Tape (Double-Sided Tape)Firestone QuickSeam™ Splice Tape (Double-Sided Tape)Firestone QuickSeam™ Splice Tape is designed for field splicing of approved Firestone membrane panels. This double-sided seam tape works best sandwiched between two overlapped pieces of liner. It is recommended to use QuickPrime™ before peeling the paper cover off and applying the self-adhesive seam tape.
    Firestone Silicone RollerFirestone Silicone RollerThe Firestone Silicone Rubber Roller consists of a 1.5” silicone rubber-covered steel roller with a wooden handle. The roller is designed to be used to mate approved Firestone membranes with Firestone QuickSeam™ Cover Strips or QuickSeam™ Seam Tape.
    Firestone Single-Ply LVOC (Low Viscosity) EPDM Bonding AdhesiveFirestone Single-Ply LVOC (Low Viscosity) EPDM Bonding Adhesive

    Firestone EPDM Bonding Adhesive BA-2004 (T) is a solvent-based contact adhesive designed specifically for bonding Firestone PondGard™ EPDM Pond Liner and Firestone 45mil EPDM Pond Liner to wood, metal, masonry and other acceptable substrates.

    Firestone Single-Ply LVOC PrimerFirestone Single-Ply LVOC Primer

    Firestone Single-Ply LVOC Primer provides an LVOC option for use in cleaning and preparing either RubberGard™ EPDM or UltraPly™ TPO membranes to receive QuickSeam™ tape products.

      Firestone Splice Adhesive SA-1065 for FlashingFirestone Splice Adhesive SA-1065 for FlashingFirestone Splice Adhesive (SA-1065) is designed for splicing RubberGard™ membrane flashing, FormFlash™ flashing, and to metal surfaces as specified in the Firestone RubberGard Specifications. It is also used as a primer at seam edges for Lap Sealant application.
      Firestone Water Block Seal (S-20) - 10oz TubeFirestone Water Block Seal (S-20) - 10oz TubeWater Block Seal (S-20) is designed to provide a seal when used in compression as required by Firestone Details. Each 10oz tube has a coverage range of approximately 10' of 3/8" to 1/2" bead.