Matala Fountain LED Light Kits feature three 10 Watt LEDs (30 Watts total), white spotlights that brightly illuminate the fountain. A dual-timer controller automatically turns on/off the fountain and lights.
Matala Air Diffuser Tubing is a simple, effective, reliable and economic way to aerate aquaculture farms. This tubing is not self-weighted, so it is not suitable for pond aeration.
Matala BioSteps 10 Replacement PartsThe Matala BioSteps 10 Gravity Discharge Filter is a high-quality external pond filter. But like any pond filter, it needs to be maintained to remain effective. These replacement parts make your filter work like new again!
Matala EZ Air Replacement PartsThese replacement parts for the Matala EZ Air Kits include hose menders, hose clamps and bags for holding fittings. These accessories give you the extras you need to finish setting up your Matala pond aeration system.
Matala Filter BrushesMatala Filter Brushesare an excellent choice for pond skimmers and biological filters. The individual filter bristles are spiral wound to give a higher surface area and provides ultimate strength.
Matala Floating Aeration Fountains are high-quality fountains that can be used in ponds, lakes or retention ponds. It can spray water up to 11.5' into the air.
Matala Geyser Hi-Flow Pump Replacement PartsLike any pump, the Matala Geyser Hi-Flow pump will wear down over time and require replacement parts in order to work properly again. If your pump is not working, trips a breaker, doesn't start or makes a grinding sound, it might be time to replace worn parts.
Matala Geyser Max-Flow Pump Replacement PartsLike any pump, the Matala Geyser Max-Flow pump will wear down over time and require replacement parts in order to work properly again. If your pump is not working, trips a breaker, doesn't start or makes a grinding sound, it might be time to replace worn parts.
Matala GeyserFlow Pump Replacement PartsLike any pump, the Matala GeyserFlow pump will wear down over time and require replacement parts in order to work properly again. If your pump is not working, trips a breaker, doesn't start or makes a grinding sound, it might be time to replace worn parts.
The Matala Gravel Vacuum Head for the Matala Power Cyclone pond vacuum cleans gravel bottom ponds without sucking up gravel! This cone-shaped vacuum head attaches to the end of the suction pipe and can be used to clean a gravel-bottom pond without draining the whole pond or removing any fish.
Matala Hakko Diaphragm Kits and Magnet BarsMatala Hakko Diaphragm Kits bring your Hakko pumps back to full potential, and are simple to install. Matala Hakko Magnets move with the diaphragm and holds the diaphragm secure.
Matala Hakko Heavy Duty Air ManifoldsHakko Heavy Duty Air Manifolds are designed specifically to reduce back-pressure on your air pump. The brass manifolds connect to the pump via a 3/4" barb. This 3/4" barb is threaded on the back, allowing for adjustment, and is easily connected to the Hakko L-tube.
Matala Hakko Medium Bubble Air Disc DiffusersMatala Air Disc Diffusers feature medium-sized holes in the rubber membrane to produce medium bubbles. Originally designed for the wastewater treatment industry, and thus conform to very high standards.
Matala Hakko Standard Air ManifoldsHakko Metal Air Manifolds connect your air pump outlet into multiple air lines, with even more outlets than the heavier duty brass manifolds. As such, they offer more of an option to adjust flow rates through different air stones and help eliminate back-pressure.
Matala Hakko Weighted Air Hose is ideal for pond and lake aeration applications, and especially for use with Hakko Air Pumps. Thick-walled 1/8" PVC has some flexibility and is suitable for any aquatic environment such as freshwater, salt water, wastewater or retention ponds.
Matala Hose-Barb Elbows: MPT to BarbThese Matala 90 degree elbow adapters connect 1/4" male pipe thread (MPT) to various sizes of barb fitting. Great for attaching threaded fittings to air tubing.