The air stone fits in the base of the biOrb® underneath the filter cartridge. It breaks up the flow of air into the aquarium, splitting it into a mass of fine bubble. It also reduces noise from the air pump.
These replacement bubble tubes fit various sizes of biOrb® aquariums.
biOrb® Bubble Tube CleanerThis two-piece cleaning set allows you to clean both the inside and the outside of your bubble tube without getting your hands wet or dirty. Designed exclusively for biOrb® aquariums!
The biOrb® Heater Pack contains a 50W standard aquarium heater capable of heating the water in any biOrb up to 60 liters (16 gallons). The included Heater Stand enables the heater to be fitted securely onto the curved surface of the biOrb, and the included thermometer allows you to monitor the water temperature.
The biOrb® Heater Stand is designed for use with traditional glass aquarium heaters less than 8" long. It affixes to a curved or flat surface, enabling the heater to be safely fitted to the acrylic surface of your biOrb.
The filter cartridge in your biOrb® should be changed every 4-8 weeks, depending on fish load and size of aquarium. The biOrb® Maintenance Kit provides a full maintenance solution for your aquarium -- enough for 8-16 weeks! Enjoy 40% savings as compared to buying all components separately.
The BiOrb® Air Pump works hard 24/7, and it will eventually wear out. It may be evident by increased noise or less vigorous bubbling. At this point, it may be time to replace your air pump. Replacing the air pump is simply a case of unplugging the old one and plugging in the new.
The biOrb® Water Level Guide and Feed Hole Plug seals the feeding hole to prevent water deposits while also doubling as a water level guide and a feeding spoon. Designed to extend downward from the feed hole to mark where your water level should remain.
These stands are a safe and secure place to place a baby biOrb®, biOrb® 30, or biOrb® 60. Flat-packed for easy home assembly, the stand measures 23" high by 13.75" in diameter when assembled.
Gold Label Pond & Aquarium Sealer, 290ml BlackGold Label Black Pond & Aquarium Sealant is powerful underwater sealer that can be used to bond all surfaces in all types of ponds and water features. No need to drain the pond -- just clean the surface to be sealed! Allow 24 hours to cure. Safe for fish when cured.
Gold Label Underwater "ONE-SHOT" Pond & Aquarium SealantGold Label "ONE-SHOT" Pond & Aquarium Sealant is a pressurized black silicone sealant for application underwater, and it will bond to liner, concrete, stone, plastic, glass or ceramic -- even underwater! Works wet or dry, so can be applied either in water or out of water.
Hikari® Aquarium Solutions® Check Valves eliminate the risk of water siphoning backward through the aquarium airline and damaging your pump or causing an electrical short. This high quality neoprene valve provides the ideal cracking pressure to reduce surging and provide long life.
Lifegard Aquatics CustomFlo® Water SystemsThe Lifegard Aquatics CustomFlo® Water System can be assembled in multiple different ways to create desired flow patterns. For use in large or small aquariums, or to upgrade your existing system. Easy to assemble, with no holes to drill!