Anjon Double-Sided EPDM Seam TapeAnjon Double-Sided EPDM Seam Tape is designed for field splicing EPDM liner panels. This double-sided seam tape works best sandwiched between two overlapped pieces of liner. It is recommended to use a liner primer before peeling the paper cover off and applying the self-adhesive seam tape.
The Carlisle Peel & Stick Pipe Seal is durable molded EPDM with a Peel & Stick Butyl Rubber Adhesive to speed installation and provide the best long-term seal. Pre-applied seam tape on the bottom of the deck flange affords easy installation ahd strong membrane bonding.
EasyPro Waterfall Installation KitEasyPro Waterfall Installation Kits combine some of the most common items needed to install ponds and waterfalls. Includes black foam, silicone, glue, primer and a 6" diameter liner patch.
Firestone QuickSeam™ Cover Strip (Single-Sided Seam Tape)The Firestone QuickSeam™ Batten Cover Strip is a 6" wide semi-cured EPDM strip laminated to a QuickSeam™ tape. Unlike the 3" tape (which is double-sided to go between two overlapping layers of liner), this self-adhesive cover tape overlaps the seam.
Firestone QuickSeam™ Corner Flashing is a self-adhesive, 8.5" diameter piece of uncured EPDM FormFlash laminated to QuickSeam™ tape. It is designed to flash outside corners or to be used as a cover patch where appropriate. It must be applied to clean, dry liner and should be pressed or rolled onto the liner.
Firestone QuickSeam™ FormFlash™Firestone QuickSeam™ FormFlash™ is an uncured EPDM strip that is factory-laminated to QuickSeam™ Tape. This strip is designed to flash inside and outside corners, pipes, penetrations and other applications as specified in the Firestone specifications and details.
Firestone QuickSeam™ Joint CoverFirestone QuickSeam™ Joint Cover is specially made to conform to irregular surfaces such as those at “T” joints, readily providing an excellent seal. Each Joint Cover is made of uncured FormFlash™ laminated to QuickSeam™ tape.
Firestone QuickSeam™ Pipe Flashing BootFirestone QuickSeam™ Pipe Flashing is specifically designed to be used for flashing of rigid round penetrations of 1"-6". It is a prefabricated pipe boot with a QuickSeam™ tape laminated to the bottom of the flange of the boot.
Firestone QuickSeam™ Splice Tape (Double-Sided Tape)Firestone QuickSeam™ Splice Tape is designed for field splicing of approved Firestone membrane panels. This double-sided seam tape works best sandwiched between two overlapped pieces of liner. It is recommended to use QuickPrime™ before peeling the paper cover off and applying the self-adhesive seam tape.
Inside/Outside Peel & Stick Corners by Carlisle®Carlisle Inside/Outside Peel & Stick Corners are made of 0.060" thick uncured EPDM flashing laminated to a 0.028" thick fully-cured, quick-applied adhesive. Designed for both inside and outside corners.
Peel and Stick Cured Cover Strip is a 0.030" thick black cured EPDM membrane laminated to a 0.035" thick fully cured synthetic rubber peel and stick adhesive. Peel & Stick flashing tape is useful for all applications that require a cured-membrane-to-cured-membrane seam.
Peel and Stick Uncured Econo Flashing Tape is a 0.040" thick black uncured EPDM membrane laminated to a 0.030" thick fully cured adhesive. Peel & Stick flashing tape is self-curing and can be used to flash pipes and scuppers.
Carlisle Sure-Seal® Pressure-Sensitive SecurTAPE is offers uniform width and adhesive thickness and features a clear poly film for easy application. SecurTAPE delivers 30% greater peel strength and 32% greater shear strength than other tapes on the market.