The Blue Diamond ET Series Air Pump Complete System Kits are set up for simple and quick installation. Each kit includes an air pump, along with the manifold (if required), weighted airline tubing and diffusers needed for pond aeration.
ET Series Air Pumps
Plain horizontal 18.0mm (0.71") O.D. outlet connection fits 3/4" I.D. tubing. A 3/4" rubber elbow is also included. Pump also comes with barbed fitting that threads into the interior of outlet to provide a 12.0mm (0.47") O.D. barb for 1/2" I.D. tubing. The SC-2-3/8 manifold adapts from 3/4" barbed fitting to two 3/8" barbed outlets. The SC-4-3/8 manifold adapts from 3/4" barbed fitting to four 3/8" barbed outlets.
2 Year Warranty
This warranty does not include the diaphragm kits, which are a replaceable, wearable part (typically replaced every 12-18 months). Warranties are at the discretion of the manufacturer as to whether the damage is due to misuse or to defect.
The most common problem with this and other larger air pumps is premature diaphragm tearing due to excessive back pressure. People don't tend to understand how much air the large sized pumps produce. If an air pump is powering too small of a diffuser or too few outlets, excessive back-pressure can occur. The solution is to add a tee with a ball valve or other "bleeder valve" so that excessive air can be bled off into the atmosphere. Start with the valve completely open and slowly close it until you have the maximum output from your air diffusers without unnecessary back pressure
Important NOTE: The Blue Diamond ET series aerators are designed for relatively shallow water. They ET Series pumps have a maximum pressure threshold of 0.25 bar which is approx 8 foot of water depth. Therefore they should probably only be used in water up to 7' deep.
Note: All prices in US Dollars