Firestone Splice Adhesive SA-1065 for Flashing
Firestone Splice Adhesive SA-1065 for Flashing
Click to enlarge image(s)
Firestone Splice Adhesive (SA-1065) is designed for splicing RubberGard™ membrane flashing, FormFlash™ flashing, and to metal surfaces as specified in the Firestone RubberGard Specifications. It is also used as a primer at seam edges for Lap Sealant application.

This adhesive requires Haz-Mat shipping and cannot be shipped UPS Next-Day Air, Second-Day Air or Three-Day Select. Regular ground shipping by Haz-Mat truck is included in the price. 

Position the membrane to overlap the distance specified along the entire length of flashing splice. Clean both surfaces and allow to dry. Thoroughly stir Firestone Splice Adhesive SA-1065 to achieve a uniform mix. Apply to both mating surfaces at the same time, using a thick, even smooth coat with long, painting-type strokes. Allow the adhesive to flash off, and mate the two surfaces. For detailed application instructions, storage instructions and safety information, see the Technical Information Sheet below.

Coverage Rate

Width of Finished Splice Width of Adhesive Application Seam Coverage per Gallon
3" Approximately 4" 150' Length
4" Approximately 5" 120' Length
W563587058 W56-358-7058
Size 1 Gallon
Storage Temperature 60-80 Degrees Fahrenheit
Shelf Life 1 Year