S Series Transfer Pumps from Franklin Electric
S Series Transfer Pumps from Franklin Electric
Click to enlarge image(s)

The S Series flooded suction centrifugal pump is suitable for use with freshwater or saltwater transfer, due to its high-tech non-corrosive plastic construction and stainless steel components. The motor shaft is completely insulated from any contact with pumping liquid, and a patented air cooled heat sink allows pump to run dry or in loss-of-prime conditions without damaging the shaft seal. Unconditional 2 year warranty against seal failure.

  • Mechanical seal has ceramic and carbon faces (All other parts are buna-n-rubber and stainless steel)
  • Floating eye seal on impeller maximizes efficiency for best flow and pressure
  • Accepts either 1.5" union or 1.5" male pipe thread.
  • UL Listed and CSA Listed (Water applications only)
Item # Model HP Discharge
x Suction
Volts Max Head Dimensions Weight
94028263 S7KM 0.75 1.5" MNPT
x 1.5"
115 43' 14.2" x 7.75" x 6.5" 22lb
94028271 S1KM 1 51' 14.2" x 7.75" x 6.5" 24lb
94028289 S15KM 1.5 62' 15.2" x 7.75" x 6.5" 26lb
94028297 S2KM 2 115/230 72' 15.2" x 7.75" x 6.5" 35lb

Flowrate (in Gallons Per Hour) Per Foot of Head
Item # Model 20' 30' 40' 50' 60' 70'
94028263 S7KM 4080 2880 1260 -- -- --
94028271 S1KM -- 4140 2820 960 -- --
94028289 S15KM -- 4740 3720 2520 -- --
94028297 S2KM -- -- 4800 3720 2700 1020

See Also